Skip to content
GlassRescue.caShop

Where to look for a product label on an older window

A readable label and a whole-window photo can help identify an older opening before a glazier visits. Here is what to photograph.

A small product sticker near the hinge side of a white residential window
Generated editorial image

Check the areas you can see safely

On some windows, the product identification is on the frame or near the hinge. An etched mark may also appear in a corner of the glass. The location varies with the manufacturer and design. Start from inside the room with the window in its usual position. If the mark is out of reach or the window binds, leave it in place and photograph the parts you can see.

Send a close photo and a wide photo together

Take the first photo far enough back to show the full opening and whether the window swings, slides or stays fixed. Then take a close image of any readable mark. Tap the label on your phone screen to focus. If glare obscures the mark, shift your viewing angle without moving the window. When you send the photos, name the room so the close-up can be matched to the right opening.

Tell the glazier what the window is doing

A label helps identify a product. The symptom still matters when deciding what to inspect. Mention whether a pane is cloudy, cracked or difficult to close, and identify the affected sash in the wide photo. If there is no label, the glazier can start with the window style, photos and visible glass measurements. Mark those measurements as visible dimensions so they can be checked separately from the finished glass size.

Sources

Prepared with AI assistance using the references above.

See the window photo checklist Book a measurement

Tools for your project

Browse products